Home > Windows 7 > Windows 7 Bsod After Classpnp.sys

Windows 7 Bsod After Classpnp.sys

You can use a plastic card (debit, credit, library, etc.) to clean off most of the old thermal compound. To achieve a Gold competency level, Solvusoft goes through extensive independent analysis that looks for, amongst other qualities, a high level of software expertise, a successful customer service track record, and It worked fine for a while, but then I ran into something similar to what you did. With no other option available, I did a hard reset. http://digitalsurgeon.net/windows-7/windows-7-classpnp-sys-bsod.html

For example, if you have a DVD drive(s), then go ahead and disconnect them from the system internally. That hdd was already in there for a long time so still not sure what caused this problem, but it's fixed. It will display the current size if size is not specified. /X – If necessary, it forces the volume to dismount first. Family and loved ones will always be a priority in my daily life.

I could not find my original boot disc, but I tried running off of a Windows 7 Upgrade disc that I had, which I assumed would work the same. I'm not a whiz so I don't understand what I did or what went wrong, since the BIOS has been set to AHCI for over a year with no errors before.At This made no change. - Finally, I have made a visual inspection of all hardware components.

Booted just fine, Windows ran CHKDSK and found a handful of errors in some indexes, and after a reboot works great. Please note: In order to boot from this DVD you may need to change the boot order in the BIOS so that the CD/DVD-ROM is the first device in the boot i opted to replace, then rebooted. After putting a note on his desktop, the computer started hanging.

After that, I keep getting BSOD. Now I just want to change the name back to classpnp.sys. Monday, October 29, 2012 1:07 PM Reply | Quote 1 Sign in to vote As it turns out, you're all going to find that something different is wrong with each of HP has some crappy printer monitoring programs that you don't need and can cause issues with shutting down.

I was given the prompt to load into windows safe mode since the pc wasn't shut down correctly, but chose the normal load. Try enabling and disabling this feature and try to restart your computer. This may sound like a bit much, but if you can't even boot the DVD without it hanging, you have a hardware issue, not a software problem. - Next, you need brainybrownSep 6, 2013, 11:21 AM Equilibrium31 said: I have a home-built PC that will not boot into Windows.

Classpnp.sysHi, I wanted to go into safe mode on windows 7 but it kept stopping at classpnp.sys . This made no change. - Finally, I have made a visual inspection of all hardware components. I threw away those bad modules, and rebooted the machine with the other 4 and everything is fine. John CowartDec 7, 2014, 3:50 AM Same issue.

Follow the on-screen directions to complete the uninstallation of your CLASSPNP.SYS-associated program. check my blog If you can't disable something, try disconnecting it. Sunday, January 08, 2012 7:36 PM Reply | Quote 2 Sign in to vote Try enter to BIOS and change the disk mode from AHCI to IDE, that works for me. Status: Answered & Closed.

The remaining residue can be cleaned of the surfaces with isopropyl alcohol. After this is done click on Next. 4b) Click on the Repair your computer link at the bottom-left of the Install Windows window. My netbook doesn't allow me to try the BIOS solutions mentioned. this content General Discussion BSOD while classpnp.sys classpnp.old (Safe Mode)Hello, I have recently taken the hard drive of my laptop and connected it to my desktop computer.

If you don't have a compatible driver installed, it can cause the shutdown problem. - After that, check out the software on your computer. Create a restore point when prompted, it's always a good idea. 6) A new window will open, again click startup repair. Specs: Toshiba Satellite S855 Intel i7 2.3GHz 6GB Ram AMD Radeon HD 7670M Friday, April 19, 2013 2:40 PM Reply | Quote 0 Sign in to vote sfc worked for me

Insert the Windows 7 DVD in the computer's DVD drive. 2.

F8 SPAM > BOOT LAST KNOWN GOOD CONFIGURATION!!! Sorry for the multiple postings but it is coming to an end soon. Most SYS files allow internal PC hardware or attached hardware, such as a printer, to communicate with third-party software programs (eg. While holding CTRL-Shift on your keyboard, hit ENTER.

The next steps in manually editing your registry will not be discussed in this article due to the high risk of damaging your system. Heres my fix: Unplugged all hard drives except the one with windows installation (in my case C: drive) Windows booted as normal. bcdedit /deletevalue {current} safeboot Sunday, September 27, 2015 3:19 PM Reply | Quote 0 Sign in to vote just enter BIOS and change sata drive mode to IDE. have a peek at these guys I had a Lenovo X1 computer that came with a notoriously bad Intel 320 series SSD that crapped out.

Have not installed any new hardware in last year. Complete list of “chkdsk” commands (Advanced PC users only): /F – Scans and fixes errors on the disk. /V – Displays every file name in each directory as the disk is ThealferFeb 18, 2015, 4:47 AM Thanks, this worked for me. 'Someone' set it to IDE.Set it to AHCI and all good now.Thanks again. Cheers.

I had just replaced all the hardware in my old pc, and had not used my HD for over a year. Have a HP laptop. The problem was exactly the same then. Go ahead and disconnect any peripherals attached to the computer. - If you're using any kind of KVM switch for multiple keyboards/mice, then go ahead and unplug that and plug in

I have not been able to try this myself yet.Also depending on your what OS you are using you could try and and get a hold of either the Vista or The best part is that repairing registry errors can also dramatically improve system speed and performance. When Do SYS Errors Occur? I updated Windows 7 and then it stopped.

worked for me, nothing else did... At 2016-04-08 08:56:00, The IT guy left the following comment ...Thanks OP this worked! I guess the driver disturbed. /It-mecanic maxmumbaiMar 29, 2014, 3:26 AM Equilibrium31 said: I have a home-built PC that will not boot into Windows. I took my USB mouse out from my laptop, fixed this problem.

Diagnostic: disk had bad sectors, so check them before anything. At this point the setup process will load files, this will take several minutes. 3b) You will now need to choose the Language, Time, currency format, and Keyboard or input RICHARD RAPPA replied on March 15, 2013: » I noticed earlier that there was an issue with memory > available memory. Click on burn. 5.

It try's to go into safe mode and then crashes and restarts and then repeats. Maintaining a driver backup provides you with the security of knowing that you can rollback any driver to a previous version if necessary. He is a lifelong computer geek and loves everything related to computers, software, and new technology. If you can get into Safe Mode, you can also try running chkdsk, sfc /scannow, or trying a system restore. - If it's hardware-related, you need to examine how old your