Home > Windows 7 > Windows 7 Bsod 7b Image Restore

Windows 7 Bsod 7b Image Restore

For some reason, XP seems to believe it is critical, and therefore throws a BSOD 7B.... After it does that, type “exit” and hit enter, then press the “Restart” button. FOLLOW US Twitter Facebook Google+ RSS Feed Disclaimer: Most of the pages on the internet include affiliate links, including some on this site. It's for the boot volume. check over here

This second attempt I want to get it right.Could you elaborate more precisely on this topic:"Then tried enabling LSI_SAS on source (note: select SCSI on HDD option, Auto seems to pick Reports: · Posted 4 years ago Top germ-x Posts: 5310 This post has been reported. Join the community of 500,000 technology professionals and ask your questions. Most people however, would prefer not to. http://answers.microsoft.com/en-us/windows/forum/all/bsod-0x7b-after-doing-a-norton-ghost-restore-to-my/b55c314f-1316-4c6e-9592-16356a9165b0

From there I typed regedit, and followed Gusmo’s steps to load the OS’s registry hive. Have you no interest in trying the wait10.sys driver I wrote today for you? I haven't used it.In fact that's easy peasy....

Does anyone have any ideas as to over come this? You may also have to disable UEFI in there as well. 0 Cayenne OP Richard Cranium Dec 21, 2015 at 2:38 UTC Two similar issues I've had:The BIOS Restore from a bare metal backup (Stop 0x0000007b) - Failed Luckily I had recently performed an entire backup of my laptop so I decided to try a restore. Will let you all know how it goes soon Reports: · Posted 4 years ago Top MitchellStokes Posts: 16 This post has been reported.

When Windows boots it will take a LONG time to get all the updated drivers - but hey, it booted, right? which storage driver should I pre-load on the old laptop before trying this procedure again?Alternately, should I just try one of the tools that do P2V conversion? Like Show 0 Likes (0) Actions 5. https://forums.virtualbox.org/viewtopic.php?f=6&t=74373 Unfortunately, I was not in a situation where I could use a VHD so I had to continue on the challenge :o) I wanted to report that I found an MS

This is not true but the exact opposite. Also check the logs from there, might give you a better idea of what is causing your BSOD. 0 Serrano OP KostasDaras Dec 21, 2015 at 11:36 UTC Managed to get image to convert to Destination- Upon boot, received BSOD 7B- Researched KB and found article http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=1005208- Tried intsalling vmscsi on Source - just got error that this is That was with the latest WinVBlock driver, I also tried with Firadisk 1.30, same result.What was on the black screen, anything?

If you do: dir /a /s /b c:\iastor.sys While booted from your image, how many iaStor.sys copies turn up?Another thing to keep in mind is that iaStor seems to be a https://www.experts-exchange.com/questions/27515021/Windows-7-BSOD-0x0000007B-after-moving-HDD-from-one-Dell-model-to-a-different-Dell-model.html Hitting "update driver" would (surprisingly for me) ask to locate "iastor.sys", which is, as expected, found in system32/drivers. As you can see from using WinObj, each ARC name is a symbolic link as detailed in the previous paragraph.If you then follow those symbolic links and look in, for example, Re: Windows 7 Guest: STOP 0x0000007B vazquezm Apr 17, 2012 2:47 PM (in response to niewoo) Hello Everyone;I created a rescue disk(boot dvd backup) from my laptop dell and tried to

Back to top Page 1 of 8 1 2 3 Next » Back to FileDisks/RamDisks: Firadisk, etc. 3 user(s) are reading this topic 0 members, 3 guests, 0 anonymous users Reply http://digitalsurgeon.net/windows-7/windows-7-ghost-image-blue-screen.html Hitting "update driver" would (surprisingly for me) ask to locate "iastor.sys", which is, as expected, found in system32/drivers. You can see USB flash storage devices under that key, as well as fixed disks. If you do: dir /a /s /b c:\iastor.sys While booted from your image, how many iaStor.sys copies turn up?I haven't tried it yet, but I would expect only 2 copies.

You should only use this after you have tried all the above first and you now need to fine tweak settings. Make sure the top radio button is selected and click next. I thought that after the restore it would maybe trigger a sysprep or force a new hardware detection. this content Check your hard drive to make sure it is properly configured and terminated.

I have tried restoring twice, and recieved errors both times. Having enabled all storage drivers in this way, when I booted the failing system, this time Windows 7 loaded very sloooooowwwwly, but without problems. Get your motherboard drivers downloaded from the manufacturer’s website.

Incoming Links STOP error 7b subcode c0000034 after p2v with Converter 5.5.3 Share This Page Legend Correct Answers - 10 points

simply by clicking "install" on the INF file, is a shortcut, and that USBoot does not need to be properly activated first (with the challenge code, etc...).For that reason, DriveGuard isn't bootrec /scanos - Same as rebuildbcd but this ADDS an additional menu option for what it finds. As far as USB services are concerned, Wimb's tools used to configure a few registry keys differently compared to USBoot (see here), but now Wimb has changed it and it's all I don't quite understand why, but it is explained in this tutorial that installing dummydisk.sys would allow it:Particularly, "dummydisk.sys" has been able to filter ON-THE-FLY the install of all NEW (so

Reports: · Posted 4 years ago Top MitchellStokes Posts: 16 This post has been reported. This fixed drive can be used at booting or not.Assumption:Windows dosn't detect a single fixed hard disk at boot.Well, this can't be true, something has to be broken, let's call a My guess is that it somehow instructs XP that internal HDD drivers are not critical when booting from USB, which prevents any BSOD 7B. have a peek at these guys I was able to image everything, but I get the same BSOD, so both paths have ended up in the same place.

There should always be a CDDB entry which associates GenDisk devices with the disk service. I am pretty convinced there is a good reason, but then can someone try to explain why ?Also, this device driver is for the internal HDD, which is not critical when Can you get to safe mode? Unfortunately, the 2nd (the dangerous one) I used, crashed my computer at 40% and when I rebooted the following happened: Asus Logo Windows Logo Quick BSOD (Back to...) Asus Logo Windows

Join the community Back I agree Powerful tools you need, all for free. Consider BartPE booted via SMB. If you burned a CD, chances are it’s the D: drive (unless it was an HP or something, then it will be E:) if it’s a thumb drive or external hard If a device is found and has already been properly installed, then the associated driver is requested to drive the device.

If using volume-license or retail OS's installed by you (or your organization), then cloning to another machine is legally acceptable. 0 LVL 30 Overall: Level 30 Windows 7 26 Dell Reply↓ mobiletechie on November 26, 2011 at 12:57 pm said: It should be noted that there are more than one 7B stop error. When it finishes it may give you instructions that you can restart your system if it does, when your system shutsdown momentarily you remove the USB and get ready to reset But while rebooing from USB drive it crashes again, until I enable the IDEcontroller again.http://www.911cd.net...indpost&p=90739In XP there is a switch in device manager for the USB device to set it as

I don't remember to have seen the screen flicker at all, but on a LCD display it's not as obvious as on good old CRT.Well maybe we can figure out what's More often than not (as I use images on multiple revisions/gens of devices) I do copy over the partition structure - its one less thing to worry about (that is - Board index The team • Delete all board cookies • All times are UTC + 1 hour [ DST ] Get VirtualBox Forum powered by phpBB © phpBB Group By any At last, starting from an IMG which results in BSOD 7B, I can get it to work successfully:either by injecting iastor.sys for my specific controller (that is, by adding the registry

Then, set it as boot option. ABOUT About Us Contact Us Discussion Forum Advertising Privacy Policy GET ARTICLES BY EMAIL Enter your email address to get our daily newsletter.