Home > Windows 7 > Windows 7 Blue Screen Disk.sys

Windows 7 Blue Screen Disk.sys

DO NOT hit ENTER yet! You want to isolate the problem to a specific startup if possible. The system hangs up the same way here as if it were starting from the hard drive. - I have also removed the battery from the motherboard to reset the bios. This made no change. - Finally, I have made a visual inspection of all hardware components. weblink

MSI's website doesn't shed any light as it's not standard error beeps (to my knowledge). #21 Jyrro, Jul 31, 2013 (You must log in or sign up to post here.) I use the XP boot disk to access the recover console, I then copied the two necessary boot files from the boot disk /i386, and now I regained access to Xp. Save and exit BIOSAfter restart, you will probably hang again on the starting Windows screen, but the animation will still be working. The cables all seemed snug.

Anyway, just to get down to the issue. If the problem does not recur then further tweaking and stability testing may be necessary for the desired overclock. ThealferFeb 18, 2015, 4:47 AM Thanks, this worked for me. 'Someone' set it to IDE.Set it to AHCI and all good now.Thanks again. What all attached is just DVD drive on second port.hard disk on first board.

Changing to SATA does not fix anything. Can confirm that this worked for me. Download the Windows MemTest86 USB image. If System File Checker finds a problem with your SYS or other critical system file, it will attempt to replace the problematic files automatically.

If memtest result is good, then go get a GWScan and run it. If you think this may help, let me know and I can upload them.My hard disc is a Patriot Torqz 2 64GB SSD and my motherboard is a Gigabyte M68MT-S2. It finally re-booted again and it is now working fine.I hope this helps. learn this here now Maybe the 0 to load was what caused it?

The hard drive may be bad, or it may be as simple as moving it to another port. #2 ViRGE, Oct 26, 2011 docp Member Joined: Jul 4, 2007 Messages: Going to try to restart and see if it loads now.Any idea how I can get this working? While holding CTRL-Shift on your keyboard, hit ENTER. And after rebooting update your drivers.

It goes upto test 8 I think.. #8 cheez, Oct 26, 2011 docp Member Joined: Jul 4, 2007 Messages: 190 Likes Received: 0 System completed all tests. http://superuser.com/questions/244197/windows-7-frozen-during-starting-windows-disk-sys-classpnp-sys However, the system stopped at the Starting Windows animated logo. It now Beeps Low long, then Beep, Beep, Beep high short, Beep low long. After I started to install the chipset, sata, ethernet, and sound drivers I started getting BSOD.

It came out clean. http://digitalsurgeon.net/windows-7/windows-7-clone-disk-blue-screen.html http://kb.wisc.edu/helpdesk/page.php?id=6565 ) HP may have a Recovery Partition, you can attempt a Factory reset, this will reinstall W7 complete with drivers and HP software, so back up data first, see #1. I just can't seem to find offending part #15 docp, Oct 28, 2011 cheez Golden Member Joined: Nov 19, 2010 Messages: 1,411 Likes Received: 0 Let's be clear. Just an idea before you go buy a new HD.

How do professional bakers handle rotating trays while mass producing cookies/muffins/cakes/etc.? Virus or malware infection that has corrupted the disk.sys file or related MSDN Disc 2939 program files. Any idea of the significance? check over here About six months ago I did a major upgrade to the system, replacing the motherboard processor and ram and upgraded to the new i7 975 chip with 6GB DDR3 RAM.

Loading... Reinstalling Windows will erase everything from your hard drive, allowing you to start again with a fresh system. Even before you get to any choice of any options, before even get the chance to wipe the HDD, which I would gladly do!

yinandyangofitAug 9, 2013, 9:07 AM How about removing the battery and trying to start the computer on power only?

It can be possible your Optical Drive isn't stable reading the data from disc too. So in the end:Is ( disk+1 ) the primary disk or secondary disk? It came defaulted with winows 8.1 OS. STR8!

How to run System File Checker (Windows XP, Vista, 7, 8, and 10): Click the Start button. Save and exit BIOSAfter restart, you will probably hang again on the starting Windows screen, but the animation will still be working. Click Yes. this content I have booted the setup into Safe mode, and it alwys stops after loading the Disk.SYS driver! #19 Nellyelephant, Apr 2, 2012 Nellyelephant Junior Member Joined: Apr 2, 2012 Messages:

Ps2 mouse and LG monitor over dvi. Error code is:BugCheck 1000007E, {ffffffffc0000005, 0, fffff8800556b308, fffff8800556ab60}At the bottom it says that is probably caused by:disk.sys ( disk+1 )Is disk+1 the primary or secondary disk?I have an SSD 840 Evo after some research i found a solution that helped. I remembered having problems with the card running under XP.

This was after running memtest. #9 docp, Oct 26, 2011 cheez Golden Member Joined: Nov 19, 2010 Messages: 1,411 Likes Received: 0 If I were you I would try running While holding CTRL-Shift on your keyboard, hit ENTER.